ComfortVu™ BACnet Thermostat Model Standard TB-HM (Line voltage)Carrier Proprietary and Confidential CARRIER CORPORATION ©2020
Installation and Operation Guide
All rights reserved
9
In Two setpoints configuration:
1
Press the [+] or [-] buttons once - “ ” and the setpoint
temperature for cooling will appear on display.
2
Use the [+] or [-] buttons to adjust the setpoint for cooling.
3
Press the [Mode] button or wait 3 seconds. “ ” and the
setpoint temperature for heating will appear on display.
4
Use the [+] or [-] buttons to adjust the setpoint for heating.
The setpoint for cooling must be higher than the setpoint for
heating.
For humidity setpoint, see Technician Setting P197.
Selecting system mode
Press the [Mode] button to switch between system modes.
Notes:
During demand for cooling or heating, the active mode will
flash.
In Auto mode, the active mode icon (Cool or Heat) will flash.
Auto mode is not available in 2-Pipe system configuration.
Содержание ComfortVu Standard TB-HM
Страница 72: ......
Страница 73: ...CARRIER CORPORATION 2020 Catalog No 11 808 725 01 2 18 2020 ...