Adding the Carrier® ChillerVu™ into the i-Vu® or Field Assistant system
Carrier® ChillerVu™
(OPN-PSM-MPCXPE)
Carrier Proprietary and Confidential
CARRIER CORPORATION ©2017
Installation and Start-up Guide
35
All rights reserved
already a CCN Gateway, you cannot configure the Carrier® ChillerVu™ as another CCN Gateway.
f)
Change the
Element
number from the default (1).
g)
Continue with the steps below.
Connect to a CCN system
1
In the i-Vu® interface, select the system in the navigation tree.
2
On the
Devices
page >
CCN Setup
tab, enter your CCN Gateway IP address and click
Connect to Gateway
.
NOTE
If using the i-Vu® Pro application, and the server has more than 1 NIC, type the IP address the server
will use to connect to controllers.
3
After connecting to the Gateway, select it in the navigation tree.
4
On the
Devices
page >
CCN Discovery
tab, verify that
Discover Tables
is checked.
NOTE
The scanning time for discovering tables increases based on the number of devices. You may choose
to discover tables at a later time for a faster scan.
5
Enter the
Bus
and
Element
ranges that encompass all your devices.
NOTE
Depending on your number of devices, it could be faster to scan several small ranges.
6
Click
Start Scan
. When the process is complete, a message appears showing the number of control programs
found.
NOTES
○
If the scan does not begin, wait a minute and try again. There may be a delay when first starting the
system.
○
If an error message appears, click on the message to view an explanation.
7
Click
Download CCN
to download the control programs, drivers, and parameters.
8
In the i-Vu® navigation
tree, right-click the Carrier® ChillerVu™ and select
Driver
Properties
from the drop-
down list.
9
Under
Driver
, expand
Protocols
.
10
On the
CCN
tab, under
Broadcast Configuration
:
○
If the Carrier® ChillerVu™ will be the time broadcaster on the CCN network, check
Time Broadcast
Enable
.
○
If there is another CCN device already set as the time broadcaster, check
Use CCN Time Sync
so the
Carrier® ChillerVu™ synchronizes its clock with the CCN network.
11
Click
Accept
.
TIPS
•
indicates you need to download the device by clicking
Download CCN
.
•
Click
to view a log of activity on the
Devices
page in the current session.
Copy to Clipboard
lets you copy
the text to paste it into another application.
•
Status messages are color coded as follows:
○
Red - reports an error
○
Blue - requires action
○
Green - indicates an upload or download is in process
