Carrier AiroVision 39 HQ, Сборка/монтаж, пусконаладка, руководство по обслуживанию

Страница: 17 / 52

17
Fig. 30. Connection profile, at length direction, unit
with intermediate base frame
Fig. 32. Unit with intermediate base frame having a
shorter top section
Fig. 34. Unit with intermediate base frame having a
longer top section
Fig. 33. Width cross section view of unit having short -
er top section, unit roof detail
Fig. 31. Connection profile, at width direction, unit
with intermediate base frame
Different connection profiles are used for the length
and width directions of sections.
• Length direction: Cut the connection profiles sup -
plied to the correct length and mount it as de-
scribed below.
Cross section view in length direction (A - A)
• Width direction: Cut the connection profiles to the
correct length and mount it as described below.
Cross section view in width direction, equal base
frame lenght (B)
• If the top section is shorter than the bottom sec -
tion, the unit ends should be finished as described
below.
• Cut the connection profiles to the correct length
and mount it as shown below.
A longer top section needs no further process at the
ends.