Carrier Access 8015-24VDC, Быстрый старт

Страница: 35 / 72

B
ASIC
C
ONFIGURATION
Basic Configuration
Before you Begin
For information about how to access the GUI, see Accessing the GUI on page 14
Because this is a quick start guide, the configuration information is not comprehensive. For more
complete definitions of the interface and its technologies, consult the user manual.
In this Section
The following sections provide brief instructions for configuring MASTERseries.
Setting the Date and Time on page 22
Opening a Configuration Profile on page 24
Setting Link Parameters on page 25
Configuring System Timing on page 29
Configuring V.35 Port Parameters on page 30
Configuring Multi-Service Ports on page 32
Configuring Cross-Connects on page 33
Configuring APS for Link Failures on page 34
Saving the Configuration on page 36
Activating the Configuration on page 36
Setting the System Name and Location on page 37
Launching a Telnet Session on page 38
ATM Configuration on page 39
Default Settings
The FLEXmaster16 and FLEXmaster8A modules shipped in your hardware configurations have a
default configuration profile loaded on them. Default configuration profiles include the following
settings:
The links on each card are cross connected - odd links from the network to the even links on the
radio side.
All of the links are set to T1-403 protocol
The loop code remains at the default code 10.
The primary clock is on the first network link 1L01
The remaining odd links have secondary clocks assigned.