Carrier Access 8015-24VDC Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 72

background image

34

MASTERseries Release 6.01 - Quick Start Guide

Basic Configuration

Configuring APS for Link Failures

Configuring APS for Link Failures

Automatic Protection Switching (APS) configures how MASTERseries responds to link failures. For
example, you can configure MASTERseries to switch to an alternate link when another link fails (red,
blue/AIS or yellow alarm). If a link fails or degrades below the user-defined thresholds, APS can
automatically re-route and/or vary link or channel parameters. When the failed link has been restored
to service, the APS feature can be configured to automatically return to the original configuration or
remain on the switched configuration.

If APS is set for a link on the master module and the master module fails, then a master toggle will take
priority over APS. The new master will take over and continue to run the current configuration.

To access the Auto Protection Switch window, select
the desired card in the Tree View, right-click to display
the context menu, and select Auto Protection Switch.

For each link, select the configuration you want to use
for the APS. In the event of a link failure, the system
performs an automatic protection switch to the specified
configuration.

To configure APS:

1. Select the desired card in the Tree View, right-click to display the context menu, and select

Auto Protection Switch.

2. The Card: Auto Protection Switch window displays.

3. The links are displayed in the left-hand column. For each link, you can select a configuration

to switch to in the event of a failure, or select NO APS (default).

Do not select the currently running configuration. The system will not perform APS if you
select the same configuration for APS as your running configuration.

«
...
46
47
48
49
50
...
»

Содержание 8015-24VDC









































































Отзывы:

Нет отзывов

Похожие инструкции для 8015-24VDC

Бренд: EAW Страницы: 6

Бренд: EAW Страницы: 6

Бренд: Danfoss Страницы: 61

Бренд: ?omtime Страницы: 62

Бренд: ZALMAN Страницы: 22

Бренд: Radicom Страницы: 27

Бренд: Kramer Страницы: 2

Бренд: Ozenda Страницы: 116

Power System H924

Бренд: IBM Страницы: 48

PowerBeam PBE-5AC-400-ISO

Бренд: Ubiquiti Страницы: 23

Бренд: OPTO 22 Страницы: 28

BiPAC 5200S RC Series

Бренд: Billion Страницы: 79

-K6-2/450 - MHz Processor

Бренд: AMD Страницы: 98

Бренд: WIN Enterprises Страницы: 25

Бренд: Z3 Technology Страницы: 83

LS-5100-16P-SI-OVS-H3

Бренд: H3C Страницы: 313

939GT2-Ultra Series

Бренд: JETWAY Страницы: 55

Бренд: Tripp Lite Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды