Carrier Access 8015-24VDC, Быстрый старт

Страница: 27 / 72

MASTERseries Release 6.01 - Quick Start Guide 13
Installation
Accessing the Text User Interface
Accessing the Text User Interface
MASTERseries uses a Text User Interface (TUI), which is a character-based display. To access the TUI
from the CLI, issue the following command sequence:
/# cd tui
/tui# tui
The main screen appears when you launch the TUI. The following diagram describes the fields on the
main screen.
The first screen displayed is the Alarms screen. This screen lists each unit installed in the chassis and
the current status of each link, port, management channel, and power supply. An alarm status summary
and a listing of any slot currently in alarm is listed at the bottom of every screen. To refresh the alarm
screen, press
R . For more information about the alarms screen, see Alarms and Diagnostics in this quick
start guide.
To exit the TUI session, press Q for Quit. This will return you to the CLI.
01 MASTER CARRIER ACCESS MASTERseries Ver 6.01
----------------------------- Sample System Name ------------------------------
Alarms sTat Diag pOrt Link tImeslot clK Connect coMmit aPs Setup Flex Quit
----- EDIT: CFG 1 ------------------------------------------ RUN: CFG 1 -------
LINK DS3 PORT ETH MSRV
<-----------------> <-> <--> <-> <----------------->
M Tn ABCD 111 1111 EFGH 111 1111
# S En MODULE TYPE 1234 5678 9012 3456 123 1234 12 1234 5678 9012 3456
- - -- -------------- ---- ---- ---- ---- --- ---- -- ---- ---- ---- ----
1 M T1 FLEXmaster16 UUUU UUUU UUUU UUUU u UD Duuu uuuu uuuu uuuu
2 -
3 -
4 -
5 -
6 -
7 -
8 -
Power Supply 1 Up Fans Up
Power Supply 2 Up
u=Unassigned U=Up D=Down I=Init d=Diag O=Off (Disabled)
---------------------------------- GREEN ---------------------------------
Alarms: Clk: INT Jan 09, 2005 11:56
System
Clock
Link Alarm Summary
Indicates alarm state
of chassis
Modules having active link alarms
If slots are in green state, this area
is blank. Also power supplies and
fans in alarm state.
Date/
Time
Master/Slave Status
Configuration
number
currently
running
Configuration
Number being
edited
Software
Version
Menu Area
Physical Slot
Number the
NMS cable is
attached to
Power Supply
and Fan
Status
Status Legend
Q (Quit)