30
MASTERseries Release 6.01 - Quick Start Guide
Basic Configuration
Configuring V.35 Port Parameters
Configuring V.35 Port Parameters
To configure the V.35 port parameters, click on the
desired port in the Tree View.
The parameters for the port display in the Detail
View.
The following steps walk you through configuring a V.35 port. Fill in the fields as described below and
click Save to apply your changes. These changes will not take effect until you commit and activate the
configuration. (See
Saving the Configuration on page 36
).
To configure a port:
1. Open the V.35 Port Configuration window by clicking on a port in the Tree View.
2. The card number and Port ID appear at the top left.
3. At the Port Name field, you can type a name (optional). The name can be up to 11 alphanumeric
characters, and names are case sensitive. This port name is used in other configuration
windows, where.
4. Select a clock source.
Internal – (Default) The system supplies a clock synchronized to the network.
External – The clock is supplied by an external CPE device (called 306 mode in other devices).
5.
Port Type and Interface Type are set as DACS and V.35 respectively. These values are read only.
Содержание 8015-24VDC
Страница 1: ...MASTERseries 6 01 QUICK START GUIDE Part Number 002 0273 2001 Product Release 6 01 February 2007 ...
Страница 14: ...xiv MASTERseries Release 6 01 Quick Start Guide Table of Contents ...
Страница 72: ...58 MASTERseries Release 6 01 Quick Start Guide Optional IP Setup Creating a DHCP Pool ...
