MASTERseries Release 6.01 - Quick Start Guide
23
Basic
Configuration
Setting the Date and Time
Using SNTP to Set the System Date & Time
To retrieve the time and date settings from a network server using SNTP:
1. Select
Set via SNTP
.
2. Enter the required information in the Network panel.
a.
Enter the IP Address of the server from which the time and date information will be
retrieved.
b. Select the Synchronization Frequency. This value is in seconds, from 16 - 1024. This
determines how often the time and date are updated.
c.
Select the Packet Transfer Protocol.
4. If desired, select
Enable Timezone Offset
to set the timezone name and the number of hours
and minutes this timezone is offset from the universal time clock (UTC).
5. Click
Save
.The updated date and time displays in the status bar.
Field
Definition
unicast
Data is synchronized using one server.
multicast
Data is synchronized with a group of servers.
anycast
Data is synchronized with the closest member of a group.
Содержание 8015-24VDC
Страница 1: ...MASTERseries 6 01 QUICK START GUIDE Part Number 002 0273 2001 Product Release 6 01 February 2007 ...
Страница 14: ...xiv MASTERseries Release 6 01 Quick Start Guide Table of Contents ...
Страница 72: ...58 MASTERseries Release 6 01 Quick Start Guide Optional IP Setup Creating a DHCP Pool ...
