Carpenter Model 75 Compu-Strip®
Carpenter Model 75 Compu
-
Strip
®
•
Phone
: (315) 682-
9176 •
Fax
: (315) 682-9160
Website
: www.carpentermfg.com •
Revised June 10
th
, 2019
Page 61
Figure 4
-
19
: Model 75 Memory Wire List Screen
The list consists of a “page” or multiple “pages” of up to 24 memory locations per page.
The list pages will contain only those memory numbers that contain an active program.
There will be a blue data highlight cursor highlighting one of the memory locations on
the page.
To recall a memory number from the list, position the blue data highlight cursor over the
desired memory number using the
keys, and press the
key. The selected
memory number will be recalled and become the active program.
If the desired memory number is not displayed on the current page, use the
and
keys to go to the next or previous pages until the desired memory number is
displayed on the current page.
Pressing the
key will exit the
LIST
function without recalling a program.
4
.
6 Batch Mode
–
The
Key
There are two modes of operation available on the Model 75: normal mode and batch
mode. Normal mode is active when the value in
BATCH SIZE
equals one (1).
Whenever
BATCH SIZE
is set greater than one, batch mode is active. The Model 75
batch mode offers a batch counting feature with separate
AMOUNT DONE
and
TOTAL
