Carlson Merlin LT, Руководство пользователя

Страница: 6 / 62

P a g e | 6
performance of the system. The user should determine the frequency of inspection and maintenance actions
according to the conditions of use.
• The product is to be used only with the appropriate Carlson-supplied cabling.
•
Installation of the Merlin LT system must be performed only by trained personnel.
•
Changing the Merlin LT port and IP addresses must be carried out using only the Merlin diagnostic tool
software by appropriately trained personnel.
• Disconnect power before performing any maintenance operations.
•
Maintenance is restricted to procedures described in section 8.
•
Beware of unexpected mechanical movement. The user must remain outside the full working envelope of
the Merlin LT system whilst in operation.
• It is the machine supplier’s responsibility to ensure that the user is made aware of any hazards involved in
operation, including those mentioned in Carlson product documentation.
•
The Merlin LT system must be transported in Carlson-supplied packaging.
•
This equipment is not suitable for use in a potentially explosive atmosphere.
1.3.2 Precautions
•
There are no user-serviceable parts inside the unit. Do not remove any panel. Do not attempt to
service parts inside the unit. If servicing is required please contact Carlson.
• Unauthorised removal of any panel may expose live connection points and non eye-safe laser
radiation.
•
Avoid directing the laser apertures towards the sun or other high-powered, infrared light sources.
• Avoid mechanical shocks
•
The laser is driven by a rotating motor. If the motor is rotated by hand or prevented from moving by an
obstruction, the motor will not be damaged. It is advisable, however, to minimise any manual movement of
the laser and to keep the instrument away from potential obstructions so the motor may turn freely.
• Users should not manually or otherwise obstruct the operation of the motor or allow clothing to come into
contact with the device, to avoid entrapment in the unit.