P a g e |
44
7.4 Setting up Merlin diagnostic tool software to receive external timing
In the Merlin diagnostic tool, select
File
>
Configure network.
The
Configuration window
opens.
Click the
GPS Receiver Type
drop down list to access the available types of receivers.
Select the timing source option matching your hardware set-up from the protocols, as detailed in section, 6.1.1.
Note: In this example the external timing source selected is
Trimble Applanix
.
Click
Save
. A
Warning
window appears.
If the new selection is correct, click
Yes
, then close the Configuration window.
If the new selection is incorrect, click
No
and reselect the appropriate
GPS receiver type
.
Figure 36 GPS receiver type drop-down list
Figure 37 Changing the GPS receiver type
Содержание Merlin LT
