43
KOHJ-H-15-EN1-1.0-15102021
3. Disconnect the air tube system’s Sixtube
connector by pressing the blue CPC button
and pulling the connector out.
The cells and the cover can be emptied for transport or storage by removing the air tubes
from the controller and allowing the cells to deflate by themselves. You can expedite the
deflation by carefully folding the cells inward.
S
torage and transport conditions for the mattress system
Temperature
-25°C to +50°C
> +35°C to +70°C with vapour pressure 50 hPa
Air humidity
max. 90%
• Store in a clean and dry place.
• The cells and the cover can be rolled up for storage using, for example, the trans-
port bag (accessory)
• Alternatively, the cells and the cover can be hung on a bar with the bottom facing
down, folded once with the bottom parts against each other or spread out flat.
• Do not store anything on top of the mattress system.
• Do not place sharp or heavy objects on or near the mattress system.
• Keep heat sources away from the mattress system.
To maintain battery performance, connect the controller to AC
power continuously for 12 hours at least every three (3) months.
