25
KOHJ-H-15-EN1-1.0-15102021
Sitting
operation can be in use for 60 minutes in one go, after which the visual informa-
tion signal of the controller will alert the care personnel to the increased risk for pressure
ulcers. For more information on the information signal, refer to section 6 of this guide.
If
Sitting
operation is used for more than 60 minutes at a time, the
patient is subject to an elevated risk of pressure ulcers.
With the device in operation, press the
Sitting
operation button to activate the
function.
The device will switch to
Sitting
oper-
ation.
The device will first adjust the torso,
then the foot region and finally the head.
The Sitting
operation LED is lit and the
cell LEDs will move up or down.
The device has activated
Sitting
opera-
tion. The
Sitting
operation LED is lit and
the cell LEDs are lit on the centre row.
5.4 Firm operation
Firm
operation hardens the entire mattress system for patient care. The device will au-
tomatically resume
Normal
operation 30 minutes after this function is selected if nothing
else is selected.
When the cells are hardened, their pressure reduction capacity is
reduced.
With the device in operation, press the
Firm
operation button to activate the
function.
The LED on the function lights up.
- Sitting -
Adjusting
- Sitting -
OK
