13
KOHJ-H-15-EN1-1.0-15102021
6. Pass the cell’s suspension straps out from
7. If the cover includes foam inserts, open
their holes.
the zippers and remove the integrated
foam inserts from the cover.
3.4 Putting on the cover
1. If the cover has foam inserts, place them
2. Insert the foam inserts into their desig-
on top of the cover. Ensure that the label
nated compartments in the cover. Close
in the foot section indicating the direction
the zippers.
to put on the cover is faced correctly.
3. Foam inserts at place.
4. Place the cells over the cover. Pass the air
tubing through its hole.
