11
KOHJ-H-15-EN1-1.0-15102021
tion carried out by a party other than Carital
®
service.
• If the mattress system behaves contrary to the functions and situations described
in this user’s guide, disconnect the air tubing from the cell’s tube system and the
power cable from the controller, turn off the controller, and contact Carital
®
service.
• The mattress system must always be serviced according to the service programme
described in this guide. A device that has not been serviced in accordance with the
service programme must not be used but must be sent to Carital
®
service, instead.
The user is responsible for any and all consequences resulting from neglecting ser-
vice.
• Scheduled maintenance may only be carried out by Carital
®
service.
3 Covers
This section presents the cover types available for the Carital
®
Optima
Cot
mattress sys-
tem as well as how to take off and put on the cover.
3.1 Medicase
®
hygiene cover
The Medicase
®
hygiene cover protects the mattress system’s cells from liquids and body
fluids. The surface of the cover is polyurethane and the lower layer is polyester. The
cover can be removed using zippers on three sides.
There is a power cable conduit on the edge of the cover with power cable pre-installed.
The air tubes of the cells are routed out at the left corner of the cover at the foot end.
The integrated conduit prevents the power cable from being clamped by the sides of the
bed or run over by its wheels when moving the bed.
Do not place a power cable in the conduit if you believe the power
cable may be clamped by the sides or folding parts of the bed.
When the size of the Optima
Cot
mattress system is 60x120/140x8 cm and 65x120/140/150x8
cm, soft, viscoelastic foam supports on the sides of the cells are integrated into the
hygienic cover, which makes the bed base optimally suitable for common cot sizes.
Integrated foam supports on the sides of the cells.
When using foam supports for the cover, make sure the patient is
always lying on the cells, not on the foam supports.
