1.1.8 Wiring diagram
Fig.1.d
Key
FU
Fuse
T
Thermostat (Klixon)
FANS
Fans
L
Light
Removing the jumper
Notes:
l
if the humidifier is not fitted with the c.pHC controller, remove the jumper. The blower will be
activated by the built-in thermostat;
l
for the list of humidifiers where the jumper must be removed, see the following table.
Unscrew the screws to remove the jumper P.
Fig.1.e
The blower leaves the factory with the jumper inserted (= blower managed by the c.pHC controller on
the humidifier).
HUMIDIFIERS ON WHICH THE JUMPER MUST BE REMOVED
Part number
Humidifier model
UR*******1/2
UR up to revision 2
UE*******1
UE up to revision 1
UG*******1/2/3
UG up to revision 3
ENG
VSDU0A0003
+030222190
rel.
1.4 – 11.02.2021
1. Introduction |
9
