1. Introduction
1.1
Description
The blower for CAREL heaterSteam, humiSteam isothermal humidifiers distributes steam directly into
rooms in structures that do not feature an air distribution system. The appliance can be installed on top of
the humidifier or wall-mounted (using accessory kit P/N VSREM0003).
1.1.1 Models
P/N
Power supply
Maximum steam flow-rate (kg/h)
VSDU0A0003
24 Vac (supplied by humidifier)
18
Tab.1.a
1.1.2 Material supplied
Description
Qty
Steam hose (L = 300 mm, ID = 30 mm/1.18 in)
1
Condensate hose (L = 220 mm, ID = 9 mm/0.35 in)
1
Metal clamp for steam hose
2
Diameter adapter for 1.5-3 kg/h cylinders (ID from 22 to 30 mm/0.86 to 1.18 in)
1
Self-tapping screw for fixing to the humidifier cover
4
Tab.1.b
1.1.3 Accessories
P/N
Description
VSDREM0003
Wall-mounting kit (screws, anchors, 2 brackets, cable gland, steam hose
fitting, base)
1312368AXX
Condensate hose (ID = 9 mm/0.35 in)
1312365AXX
Steam hose (ID = 30 mm/1.18 in)
1312367AXX
Steam hose (ID = 40 mm/1.57 in)
Tab.1.c
1.1.4 Receiving/identification
After having received the appliance, check that the box is not damaged and all of the components have
been delivered. Verify on the identification rating plate that the model is suitable for the required
installation.
Note:
immediately report any damage to the carrier.
Store the appliance in a protected area in the conditions specified in the technical data table.
The appliance can be identified via the rating plate on the rear, which shows the part number, model,
serial number and other information.
Fig.1.a
ENG
VSDU0A0003
+030222190
rel.
1.4 – 11.02.2021
1. Introduction |
7
