Carel MasterAria, Руководство пользователя

Страница: 37 / 60

37
ENG
MasterAria +030220481 - rel. 1.0 - 12.11.2007
P Parameter Def.1 Def.2 Def.3 Min Max UOM SV type SV # Modbus® access notes
16 Function of probe B2 (see P15) 4 2 2 0 7 --- I 106 234 U
17 Function of probe B3 (see P15) 6 6 6 0 7 --- I 107 235 U
18 Increase cooling/dehumidifi cation set point in sleep 10 10 10 0 255 °C/10 A 18 18 U
19 Decrease heating set point in sleep 10 10 10 0 255 °C/10 A 19 19 U
20 ADC limitation coeffi cient 6 6 6 0 15 --- I 2 130 U
21 ADC average coeffi cient 6 6 6 0 15 --- I 3 131 U
22 Select optional compensation probe
0 Compensation disabled
1 Compensation enabled on B1=outside probe
2 Compensation enabled on B3=outside probe
0 0 0 0 2 --- I 4 132 U
23 Set point delta for compensation in cooling
0 Compensation disabled
0 0 0 -99 127 °C/10 A 20 20 U
24 Factor for compensation in cooling
0 Compensation disabled
0 0 0 -20 20 --- A 21 21 U
25 Set point delta for compensation in heating
0 Compensation disabled
0 0 0 -99 127 °C/10 A 22 22 U
26 Factor for compensation in heating
0 Compensation disabled
0 0 0 -20 20 --- A 23 23 U
28 Visibility of output values to supervisor
0 Disabled
1 Enabled
2,3 DO NOT SELECT
0 0 0 0 3 --- I 6 134 U
30 Fan set point (Manual & AUTO) 15 15 15 0 255 °C A 24 24 U
31 Fan diff erential (Manual & AUTO) 20 20 20 0 255 °C A 25 25 U
32 Flush off
0 Disabled
>0 Fan off time
2 2 2 0 255 min I 8 136 U
33 Flush on
0 Disabled
>0 Fan on time
90 90 90 0 255 s I 9 137 U
34 Flush mode
0 Function disabled
1 Flush function active in cooling, dehumidifi cation &
AUTOMATIC
2 Flush function active in heating & AUTOMATIC OFF
3 Flush function active in heating, cooling,
dehumidifi cation & AUTOMATIC OFF
0 0 0 0 3 --- I 10 138 U
35 Flush time when changing mode 30 30 30 0 255 s I 11 139 U
36 Select AUTOMATIC with Set point or Comfort
0 Comfort function disabled
(set point can be changed from “acqua” terminal)
1 Enable Comfort
(only ±3 °C change in set point from P01)
0 0 0 0 1 --- I 12 140 U
37 Display (“acqua” terminal)
0 Display set point
1 Display control probe (BT or B1)
2 Display probe B2
3 Display probe B3
4 Display position of modulating valve
5 Display position of modulating damper
0 0 0 0 5 --- I 13 141 U
38 Disable operating mode
1 AUTOMATIC
2 cooling
4 dehumidifi cation
8 ventilation
16 heating
32 autofan
64 sleep
128 ON/OFF timer & display clock
The setting is achieved by adding the values shown
below, each of which corresponds to the disabling of the
corresponding function.
EXAMPLE:
Activation of AUTOMATIC mode only: 2+4+8+16 = 30
0 0 0 0 255 --- I 14 142 U