CARDIOSTRONG CST-RX40, Руководство по сборке и эксплуатации

Страница: 18 / 64

RX 40
18
Step 9: Connecting the console
1. Connect the console cables (703+704) to the computer (714).
2. Mount the console mast (150) on the mast joint (151) by pressing the pins on the sides of the
mast (150) in and then sliding the mast joint (151) until it locks.
3. Rotate the mast joint (151) on the other side as in the figure below.
L
NOTICE
The height of the console arm cannot be adjusted. The console can only be placed in the
position illustrated below.
Step 10: Connecting the equipment to the mains supply
࣑ ATTENTION
The equipment must not be connected to a multiple socket, otherwise it cannot be guaranteed
that the equipment will be supplied with sufficient power. Technical errors can result.
Plug the power plug (715) into a wall outlet that complies with the instructions in the chapter on
electrical safety.