CARDIOSTRONG CST-RX40, Руководство по сборке и эксплуатации

Страница: 11 / 64

RX 40
11
2 ASSEMBLY
2.1 General Instructions
⚠
DANGER
+ Do not leave any tools, packaging materials such as foils or small parts lying around,
as otherwise there is a danger of suffocation for children. Keep children away from the
equipment during assembly.
⚠ WARNING
+ Pay attention to the instructions attached to the equipment in order to reduce the risk of
injuries.
⚠ CAUTION
+ Do not open the packaging when it is lying on its side.
+ Ensure to have sufficient room for movement in each direction during assembly.
+ The assembly of the equipment must be carried out by at least two adults. If in doubt, seek
the help of a third technically skilled person.
࣑ ATTENTION
+ To prevent damage to the equipment and the floor, assemble the equipment on a mat or
packaging board.
L
NOTICE
+ In order to make the assembly as simple as possible, some screws and nuts to be used can
already be pre-assembled.
+ Ideally, assemble the equipment at its later set-up place.
+
Note of manufacturer:
The pull strap is equipped with a return spring – thus the pull strap
is winded up automatically. The return spring is equipped with the smallest possible power.
The reason for the light return spring is to offer the user the biggest training effect for the
rear thigh muscles. These muscles are demanded, when the user moves the seat forwards. If
the return power would be strong, the user would be pulled.