Cardioline ar1200view, Руководство пользователя

Страница: 9 / 56

9
only original electrodes or electrodes responding to IEC and AAMI
standards.
-
If an electrosurgical scalpel is in use, the patient cable should be
disconnected from the device.
-
At all events, when defibrillators or high-frequency surgical devices are
being used at the same time, it is essential to take the greatest care. If
there is any doubt when such devices are in use, disconnect the patient
from the electrocardiograph temporarily.
-
The device recognises the impulses generated by a pacemaker and does
not interfere with its operation, as prescribed by standards in use at the
time of drafting this manual.
-
Avoid exposing the equipment to extreme temperatures, excessive dust
or dirt, and very salty or damp environments; observe the ambient
conditions described in detail under the "Technical specifications”
heading.
-
Periodically check the efficiency of all accessories and of the device
itself. Contact the Authorised Assistance Centre whenever the device
seems to be operating irregularly. To prolong the life of your device,
have it checked periodically by an Authorised Assistance Centre.
-
Warning : The electrocardiograph can be used for intracardial
applications.
-
Warning : It is therefore necessary, before activating the equipment, to
make sure of the connection to ground (normally secured by the power
supply cable). If grounding of the main electrical service is not certain,
do not connect the device and use it powered only by the rechargeable
internal battery.
-
Warning : do not use the device in the presence of anaesthetics or
volatile gases!
-
Warning : devices for medical applications must be used only by
persons who by virtue of training or practical experience are able to
ensure maximum safety and effectiveness in operation. Operators must
in any event read this manual carefully and familiarise themselves with
the instrument before using it on a patient.
-
Warning : the indications obtained using automatic interpreting
programs or other diagnostic aids must be reviewed and countersigned
by a qualified medical person!
-
Warning : the device is provided with an IR interface for the transfer of
data to other devices. The IR interface must not be masked, even
accidentally, as this will adversely affect its capability and its operation,
interrupting and preventing the correct flow of data.
-
The manufacturer will acknowledge liability for the safety, reliability and
functional efficiency of the device only if:
modifications and repairs are performed by the manufacturer or by
an Authorised Assistance Centre;
the AC mains power supply of the building responds to current
regulations;
the device is operated according to user instructions;
any accessories in use are those approved by the manufacturer.