Cardioline ar1200view, Руководство пользователя

Страница: 18 / 56

18
Warning: the internal feeder of the device is classified under Class I.
Warning: when the device is connected to the mains, the battery is automatically
recharged during use.
To gain maximum benefit from the characteristics of the dual power supply
system, follow the indications given below.
Recharging the battery
The battery must be recharged when the power indicator symbol is partly
empty
: the reserve charge is lower than 30%.
Connect the electrocardiograph to the mains: LED lit. Complete battery
recharging requires at least 18 hours.
For longer life, the batteries should be allowed to run down and then be
recharged completely at least every two months.
A complete recharge allows the recording of up to 300 complete ECGs
(automatic recording mode, 3-channel print format, 25 mm/s speed).
Note: recording with different print format the maximum number of tests recorded
can change.
When the batteries are run-down (symbol ), it is still possible to make
an ECG recording by connecting the device to the AC supply.
Warning: do not dispose of run-down batteries in the environment. Use only original
batteries supplied by the manufacturer. The average life of the batteries is about one
year.
Warning: the device must be connected only to mains equipped with earth
connection executed in compliance with applicable regulations.
2.4 How to switch on the electrocardiograph
for at least two seconds.
The display turns on showing the “Operation Profile” screen. When the
booting procedure is completed, the ECG signal and the settings
selected are displayed on screen. Now you can use the device.
Warning: if the symbols and are displayed, internal power is insufficient
and the battery must therefore be recharged by connecting the device to the mains
(see heading “Power supply; ...”). The battery will recharge even if the device is in
use.