25
2.
Place the X-rail, with the decals facing the front,
across the top of the two empty Y-Axis carriage
boxes, as shown in
Figure 3-17
.
Install the Y1-Carriage
1.
Identify the Y1 carriage. See
Figure 3-17
.
2.
Use the 4mm hex key and four (4) M6x12mm
button head cap screws to attach the Y1-carriage
to the left end of the X-rail as shown in
Figure 3-18
.
When properly attached, the motor body will be to the
inside and behind the X-rail. The V-wheels, idlers, and
motor pulley will be facing out as shown in
Figure 3-18
.
3.
Snug the Y1-carriage to the X-rail, but do not fully
tighten the screws.
Figure 3-17
Figure 3-16
PRO TIP:
Screws going into the ends of the
extrusion rails are prone to cross-threading. Pre-
screw without the carriage present to clear any
debris from the threads. Screws should thread
easy with little resistance and without wobble.
Also, when attaching the carriage, partially insert
each of the four (4) screws before tightening.
Tighten a little at a time in a cross-pattern.
Figure 3-18
NOTE:
Each aluminum extrusion has a pair of
integrated v-rails running the entire length of one
side. These v-rails serve as linear tracks for the
V-wheels, securing the carriages to the gantry,
while at the same time allowing them to glide
along smoothly. When properly assembled the
v-rails will face to the inside (Y1 and Y2) or
forward (X). See
Figure 3-16
.
Содержание SHAPEOKO XXL
