15
Attach the Front MDF Baseplate
1.
Place the second MDF baseplate across the front
half of the cross straps and line up the screw
holes, six across the front and three across the
middle as shown in
Figure 2-7
.
2.
Use the 3mm hex key to insert three (3)
M5x25mm button head cap screws through the
baseplate and into the cross straps.
3.
Turn the screws until they stop but do not fully
tighten.
Attach the Rear Endplate
1.
Select one of the two (2) identical endplates.
2.
Place the endplate along the back of the machine
and slide it under the three cross straps. See
Figure 2-8
.
3.
Adjust the endplate, cross straps, and MDF
baseplates so that all six holes align. Use one or
more of the spare hex keys to help with alignment
as shown in
Figure 2-9
.
4.
Use the 3mm hex key to insert six (6) M5x25mm
button head cap screws into the six countersunk
holes in the MDF baseplate, through the cross
straps, and into the integrated nuts of the rear
endplate. See
Figure 2-9
.
5.
Turn the screws until they stop but do not fully
tighten.
Figure 2-7
NOTE:
We’ll come back and tighten all of the
baseframe screws later on when squaring the
machine.
NOTE:
If you are having trouble getting any of
these screws started, make sure the machine is
square and apply a little bit more downward
pressure. However, be very careful not to cross
thread any of the screws.
Figure 2-8
Figure 2-9
Содержание SHAPEOKO XXL
