Capital MAESTRO SERIES, Инструкция по использованию и уходу

Страница: 16 / 36

15
BURNER ADJUSTMENTS (continued)
To Adjust:
(Tools Required: Pliers, Flat Head Screwdriver)
1. Light the burner.
2. Turn the control knob to the lowest setting (all the way counter clockwise).
3. Remove the knob.
4. While holding the valve shaft with the pliers, insert a thin flat-Head screw-
driver into the shaft and while
viewing the burner adjust to a minimum stable flame. (Fig 10)
WARNING: IMPORTANT!
Before lighting, inspect the gas
supply piping or hose prior to
turning the gas “ON”. If there is
evidence of damage or excessive
wear, it must be replaced prior to
use.