Capintec CRC-25R, Руководство пользователя, Страница: 219 / 228

CAPINTEC, INC CRC
®
-25R
April 12 APPENDIX IV A4 - 3
Example: To measure Co60, place the sample in the Chamber and press
. Press . Press
. The activity for Co60 is automatically displayed.
4. CALIBRATION NUMBERS: To measure the activity of a nuclide that is not
stored in the memory, Pre-Set keys, or User defined keys, press the CAL# key,
input the Calibration Number for the nuclide using the alphanumeric
(number/letter) keys, and press the
ENTER key. The activity can then be
measured. Simply place the sample in the Chamber.
Note: Calibration Numbers for R Chambers are listed in Appendix II.
Example: Press . Input the Calibration Number. Press .
Future Activity
The CRC
®
-25R has a special feature that allows you to automatically determine the
activity of a sample at some point in the future. From the Measurement screen, press
TIME .
Example: Press . Input the new time & date in the 24-hour format. Press
. The “FUTURE” activity is displayed.
Enter Test Data
(Reference CHAPTER 6: CHAMBER INITIALIZATION, SECTION: TEST SOURCES)
The Test Source Data must be entered from the
Main Setup Menu . To access this menu,
press to return to the Measurement Screen. Press to display the Main
Menu .
Select
SETUP . The Setup Menu will appear.
SET
1. Time
UP
2. Ci/Bq
3. Printing
4. Other
5. Screen
1. Inventory
2. Calculations
3. Diagnostics
4. Setup
MENU HOME
ENTER
TIME
ENTER
CAL#
ENTER
QZ
0
MNO
6
MNO
6
ABC
2
NUCL