Canon XF605, Инструкция по эксплуатации

Страница: 210 / 238

Trouble s hooting
210
Horizontal band s appear on the s creen.
- Thi s i s a phenomenon typical of CMO S image s en s or s when recording under s ome type s of lighting. Thi s i s not a
malfunction. You may be able to reduce the s ymptom s by s etting the s hutter s peed mode to [ S peed] and the s hutter
s peed to a value matching the frequency of the local electrical s y s tem: 1/50* or 1/100 for 50 Hz s y s tem s , 1/60 or 1/120
for 60 Hz s y s tem s .
* May not be available depending on the frame rate.
Audio i s not recorded.
- The audio input s ource i s not correctly s elected ( A 94) or a microphone i s not connected to the s elected terminal.
- When u s ing the INPUT 1/INPUT 2 terminal s , ma k e s ure you are u s ing an XLR connector. When u s ing the MIC terminal,
ma k e s ure you are u s ing a conden s er microphone with a

3.5 mm s tereo mini plug.
- The external microphone i s not turned on or it s battery i s depleted.
- The external microphone connected to the INPUT 1/INPUT 2 terminal require s phantom power. S et the corre s ponding
INPUT 1/INPUT 2 audio s ource s election s witch to MIC+48V (
A
94).
- The external microphone connected to the MIC terminal require s plug-in power but > [
¡
Audio S etup] >
[MIC Input] i s s et to an option other than [MIC (with Power S upply)].
- To record audio for s low & fa s t motion clip s , s et the recording mode to [ S &F Clip / Audio (WAV)] (
A
35).
Sound i s di s torted or i s recorded at lower level s .
- Thi s may happen when the appropriate audio level i s not s et correctly. Adju s t the audio recording level manually
(
A
95). You can al s o activate the microphone attenuator (
A
96) to reduce the audio level.
- The audio s ource s elected for the INPUT terminal or MIC terminal i s incorrect. When u s ing an external microphone, s et
the INPUT s witch to MIC or s et > [
¡
Audio S etup] > [MIC Input] to one of the [MIC] option s . When u s ing an
analog audio device s et the INPUT s witch or the [MIC Input] s etting to [LINE].
- The audio level i s adju s ted manually and the recording level i s s et too low. Chec k the audio level meter on the s creen
and adju s t the audio level correctly (
A
95).
The picture i s di s played correctly but there i s no s ound from the built-in s peaker.
- S pea k er volume i s turned off. Adju s t the volume (
A
134).
- Di s connect any cable s /external device s connected to the
×
(headphone) terminal.
Card s and Acce ss orie s
Cannot in s ert the card.
- The card you are trying to in s ert i s not facing the correct direction. Turn it over and in s ert it (
A
32).
Cannot record on the SD card.
- A compatible card mu s t be u s ed (
A
31).
- Initialize the card (
A
32) when you u s e it with the camera for the fir s t time.
- The card i s full or it already contain s the maximum number of clip s (999 clip s ). Delete recording s (
A
138) to free s ome
s pace or replace the card.
- The clip number ha s reached it s maximum value. S ave your recording s and initialize the card (
A
32) or delete all the
clip s (
A
138).
- The LOCK s witch on the S D card i s s et to prevent accidental era s ure. Change the po s ition of the LOCK s witch.
- The folder and file number s for MP4 clip s and photo s have reached their maximum value. S et
>
[
Æ
Recording/Media S etup]
>
[MP4 Clip/Photo Numbering] to [Re s et] and in s ert a new card.
Recording to and playing back from a card i s s low.
- Thi s may occur a s recording s are made and deleted repeatedly over time. S ave your recording s and initialize the card
(
A
32).
The RC-V100 Remote Controller or commercially available remote control doe s not work.
- Ma k e s ure that
>
[
B
S y s tem S etup]
>
[REMOTE Term.] i s s et to [RC-V100 (REMOTE B)] or [RC-V100
(REMOTE A)] when u s ing the RC-V100 Remote Controller or to [ S tandard] when u s ing a commercially available remote
control (
A
111).
- Turn off the camera, reconnect the remote controller and then turn the camera bac k on again.
- When the currently s elected cu s tom picture file i s protected, detailed cu s tom picture s etting s cannot be adju s ted
u s ing the RC-V100. Unprotect the file (
A
120).