Canon XF605, Инструкция по эксплуатации

Страница: 162 / 238

Configuring Connection S etting s
162
3 Configure the destination FTP server. Select [Server] and [Port No.] > [OK].
• Enter the FTP server’s IP address or host name using the keyboard screen. Enter the port number using the
data entry screen (
A
27).
• Usually, the port number used is 21 (FTP or FTPS transfers) or 22 (SFTP transfers).
• Depending on the FTP mode selected in step 2, perform either step 4 or steps 4-5 and then continue to
step 6.
SFTP transfers
4 Enter the user name and password for the SSH protocol’s authentication. Select [User Name] and [Password]
> [OK].
• Enter the desired user name and password using the keyboard screen (
A
27).
FTP/FTPS transfers
4 Select [Enable] to use passive mode or [Disable] to use active mode.
• In most cases, select [Disable].
5 Enter the user name and password for the FTP server. Select [User Name] and [Password] > [OK].
• Enter the desired user name and password using the keyboard screen (
A
27).
All transfer modes
6 Select the destination folder on the server.
7 Select [OK]
• The function settings are saved to a [MODE] file.
8 Select the connection setting (SET1 to SET20) where to save the settings.
9 Select [OK].
• The camera will connect to the network and will be ready to use the FTP transfer function (
A
174).
Option s for [FTP Mode]
[FTP]: Transfer method where the data is not encrypted.
[FTPS]: Secure transfer method using a root certificate (
A
167).
[SFTP]: Secure transfer method using an SSH secure channel.
Option s for [De s tination Folder]
[Root Directory]:
Files are saved on the root directory of the destination FTP server.
[Select Folder]: Enter the desired path using the keyboard screen (
A
27). If the folder does not exist on the
destination FTP server, it will be created automatically.