Canon VK-16, Руководство по настройке

Страница: 91 / 142

91
6
Configur
ing
Recording
Schedules
Recording Schedule - Edit Sensor Events Settings
You can specify recording settings based on the occurrence of a sensor event. A number
of tabs in the
Sensor Event Settings dialog are shown to reflect the number of sensors
on each camera. You can modify the recording settings for each sensor.
●
Step 1: Next to “On sensor event”, click Settings...
The Sensor Event Settings dialog opens.
Configure Motion and Sensor Settings
Click a tab to change the
sensor’s settings.
The sensor name
displayed is the name set
by the Camera Server.
The Top page of the
Camera Server is
displayed after Internet
Explorer launches.
Set whether or not to
use additional options
(exposure, white
balance, and focus).
Night Mode is available
for VB-C300, VB-
C50i/VB-C50iR, VB-
C50FSi and VB-C50Fi
Camera Servers or VC-
C50i/VC-C50iR cameras
connected to Camera
Server VB150s. Select
from
Not specified , Day
Mode , or Night Mode .
You can set External
Outputs to On or Not
Specified when a sensor
event occurs.
●
Frequent sensor events result in high CPU load on the Storage
Server. If you have 10 or more sensor events per minute
continuously, we recommend continuous recording.
●
Setting Night Mode to “Enabled” will activate the IR cut filter. It
will not turn on the built-in IR light. To turn on the IR light,
perform the operation from the Video Window menu.
Note
Control the camera via
the
Camera Control
Panel .
Refer to the Viewer
Manual for the
information about the
Camera Control Panel.