Controlling the Camera from the Wireless Controller
20
Storing a Preset Camera Position
This section describes how to store a camera head angle, zoom position and brightness level.
Up to nine (1 to 9) preset positions can be stored. Switching the power off or the camera off does
not erase the stored preset positions.
To store a position
1. Set the camera head angle, zoom position and brightness.
■
The focus setting is not stored.
2. Press the
s
button.
■
The LED on the camera blinks green (at 0.5-second intervals).
■
Press the
c
button again to cancel the operation.
3. Press a button from
1
to
9
.
■
When the position has been stored, the LED on the camera
stops blinking and remains green.
■
Any existing preset information is overwritten.
To restore a preset position
Press a button from
1
to
9
.
■
The VC-C4/VC-C4R returns to the stored camera head angle,
zoom position and brightness level.
MEMO
●
During preset operations, the camera pans and tilts at the speeds set for pan/
tilt operation in the setting menu. When the “AUTO” setting is selected, the
head moves at the maximum speed (
→
P.25).
●
Stored preset position information can only be overwritten. Stored preset
positions cannot be erased. However, the preset position is cleared if the
COMMAND mode is changed.
●
If the camera is in manual focus mode, the focus may be incorrect when a
preset position is restored. In this event, set the camera to auto-focus mode or
focus the camera manually.
3
2
1
AF
6
5
4
MF
9
8
7
0
MENU
ID
HOME
Fn
BRIGHT
ON SCREEN
∞
SET/OK
CANCEL
ZOOM
T
W
