16
Controlling the Camera from the Wireless Controller
While the wireless controller buttons are being used, the LED on the camera blinks green (at
0.1-second intervals) (
→
P.14).
Changing the Camera Head Angle
(pan/tilt/home position)
Use the procedures below to change the camera head angle.
To move the camera head left and right (pan)
Press the
4
and
6
buttons.
■
When pointing the remote control in the direction of the camera
and using it, the image on the monitor moves in the direction of
the arrow on the button pressed, and the camera head moves
in the oppsite direction.
When DIRECTION MIRROR (
→
P.25) is set to ON, the camera
head moves in the direction of the arrow on the button pressed.
■
Holding the button down increases the speed of camera head
movement as shown below.
Low speed
→
Medium speed
→
High speed
To move the camera head up and down (tilt)
Press the
8
and
5
buttons.
■
Holding the button down increases the speed of camera head
movement as shown below.
Low speed
→
Medium speed
→
High speed
To move the camera head to the Home position
Press the
h
button.
■
This moves the camera head to the center position at high speed.
NOTE
Do not attempt to manually change the camera head angle.
If the camera head is accidentally moved, either by hand or by
being struck by an object, always press the
h
button. The
deviation from the position that the camera memorizes will be
corrected and the operation will be back in order.
Range of Camera Head Movement
The figures below show the range of camera head movement from a horizontal position. The
default range of upward movement for the VC-C4 is 30
°
, but the range can be set to 90
°
(
→
P.26).
170
°
10
°
90
°
30
°
100
°
100
°
30
°
VC-C4
VC-C4R
170
°
3
2
1
AF
6
5
4
MF
9
8
7
0
MENU
ID
HOME
Fn
BRIGHT
ON SCREEN
SET/OK
CANCEL
ZOOM
T
W
