Canon VB-M640V, Руководство по эксплуатации

Страница: 156 / 287

156
The Audio Reception panel appears.
Use the [Output Volume] slider to adjust the volume as needed.
The [Audio Reception] button icon will change to while receiving audio.
Note
• To receive audio, you must set [Server] > [Audio Server] > [Audio Transmission from the Camera] to [Enable] in the Setting Page
beforehand (P. 92).
• The first time the Audio Reception panel is opened with the VB Viewer, a message to install the “Canon Network Camera Audio
Receiver” add-on will appear in the information bar of the web browser. Install the add-on.
• If you select [Receive audio] in the Audio Reception panel, you will continue to receive audio even if you close the panel.
• To use the audio function in environments that use a proxy server, select in Internet Explorer [Use a proxy server for your LAN] in
[Internet options] > [Connections] tab > [LAN settings] > [Proxy server], then specify the camera IP address in [Advanced] >
[Exceptions].
• If you click ([Reconnect] button) and reconnect, audio reception will stop and camera control will be released.

Transmit Audio
You can use the Admin Viewer to transmit audio received from an external device connected to the computer to a
speaker with an amplifier connected to the camera.
The Audio Transmission panel appears.
Audio transmission starts.
Use the [Input Volume] slider to adjust the volume as needed.
1
Click the [Audio Reception] button.
2 S elect [Receive audio].
1
Click the [Audio Transmission] button.
2
Click the microphone button.