Canon ScanFront 400 Скачать руководство пользователя

Страница: 193 / 206

193

Chapter 9 Troubleshooting

Maximum Job Buttons has been
registered. You can’t register
any more.

Cause

The limit for the number of job button registrations has been exceeded.

Solution

Delete job button registrations that are no longer used and then try
again.

Maximum users has been
registered. You can’t register
any more.

Cause

The limit for the number of user registrations has been exceeded.

Solution

Delete user registrations that are no longer used and then try again.

Cause

The user specified when logging in does not exist in the authentication
server.

Solution

Make sure you correctly enter your user name and password. Contact
the administrator of the ScanFront if this problem persists.

The authentication server
cannot be used. Please check
the connection and setting of
the server.

Cause

The authentication server settings are incorrect.

Solution

Check the authentication server settings.

Cause

The computer acting as the authentication server is not turned on.

Solution

Turn on the computer acting as the authentication server.

A character that cannot be used
for a path is included.

Cause

An invalid character exists in the specified path.

Solution

Do not use the following characters when specifying paths.
/:?*"<>|

New password and confirmation
password do not match.

Cause

The new password and confirmation password do not match.

Solution

Enter the same password for the new password and the confirmation
password.

Password is not registered. OK
to proceed?

Cause

A password has not been set for the user to be registered.

Solution

Check the password prior to registration.

Password is incorrect.

Cause

The password that was entered is incorrect.

Solution

Enter the uppercase and lowercase letters for the password correctly.

Содержание ScanFront 400















































































































































































































Результаты поиска

Содержание ScanFront 400

Отзывы:

Похожие инструкции для ScanFront 400

Бренды по названию

Популярные бренды

Canon ScanFront 400, Инструкция по эксплуатации

Результаты поиска

Содержание ScanFront 400

Отзывы:

Похожие инструкции для ScanFront 400

Бренды по названию

Популярные бренды