4
When Not Using a Hard Disk
When you are not using a hard disk, turn the printer OFF using the following
procedure.
1
Make sure that the
ジョブ
indicator is off.
2
Press "
" of the power switch on the printer.
When Using a Hard Disk (Only When a Hard Disk Is Installed)
When using the optional hard disk, turn the printer OFF using the following
procedure.
IMPORTANT
•
If you perform a shutdown when any job of which you stopped the operation or of
secured print is in the hard disk, the message <
ジョブガ ノコッテイマス
> is displayed. If
you perform a shutdown, all the jobs are deleted. However, the jobs stored in the boxes
are saved on the hard disk as it is. When you want to continue to print, press [
オンライン
]
to place the printer online.
•
Once you perform a shutdown, you cannot cancel the operation in midstream. When you
want to turn the printer ON again, turn the printer OFF once following the instruction of
the message, and then turn the printer ON.
Off
Содержание satera LBP-5400
