Canon satera LBP-5400 Скачать руководство пользователя страница 48

Страница: 48 / 89

Procedure for Clearing Paper Jams

Remove any jammed paper using the following procedures.

IMPORTANT

The error message may remain if jammed paper is removed without opening the front
cover or top cover. In this case, open and close the front cover or top cover once.

Confirm all the messages that appear in the display.

Messages appear one at a time. Confirm all of them.
As the messages disappear when the cover is open, take a note of them if
required.

Check the output tray and remove any jammed paper.

IMPORTANT

If the jammed paper cannot be removed easily, do not try to remove it forcefully but
proceed to the next step.

NOTE

If unfixed toner is on the removed paper, it may adhere to the paper to be printed
next.

13 ﾖｳｼｶﾞﾂﾏﾘﾏｼﾀ

ﾏｴｶﾊﾞｰｴﾘｱ

Содержание satera LBP-5400


























































































Результаты поиска

Содержание satera LBP-5400

Отзывы:

Похожие инструкции для satera LBP-5400

Бренды по названию

Популярные бренды

Canon satera LBP-5400, Руководство пользователя

Результаты поиска

Содержание satera LBP-5400

Отзывы:

Похожие инструкции для satera LBP-5400

Бренды по названию

Популярные бренды