Canon POWERSHOT G9X MARK II, Руководство пользователя

Страница: 136 / 219

136
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wireless Features
● Connections require that a memory card be in the camera.
● You can also change the camera nickname on the screen in step
2 (
= 158).
● You can also send multiple images at once and change the image
size before sending (
= 151).
● To disable NFC connections, choose MENU (
=
29) > [ 4] tab
> [Wireless settings] > [Wi-Fi Settings] > [NFC] > [Off].
Connecting via NFC When Camera Is in Playback Mode
z
Press the [ ] button to turn the camera
on.
z
Touch the smartphone with Camera
Connect installed (
=
135) against the
camera’s N-Mark ( ).
z
Touching an image to send will label it
with a [ ] icon.
z
To cancel selection, touch it again. [ ] is
no longer displayed.
z
Repeat this process to choose additional
images.
z
After you finish choosing images, press
the [ ] button, and then touch [OK].
z
Touch [Send].
z
The images are now sent.
● If during connection a message on the camera requests you
to enter the nickname, enter it as described in “On-Screen
Keyboard” (
=
30).
● The camera does not keep a record of smartphones you connect
to via NFC in Playback mode.
● You can preset images to transfer at your desired size (
=
151).
4
Send an image.
z
Drag images left or right to choose an
image to send, and then touch [Send this
image].
z
[Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
z
To end the connection, touch [ ] in
the upper right of the screen, and then
touch [OK] on the confirmation screen.
You can also use the smartphone to end
the connection.
● When using NFC, keep the following points in mind.
- Avoid strong impact between the camera and smartphone. This
may damage the devices.
- Depending on the smartphone, the devices may not recognize
each other immediately. In this case, try holding the devices
together in slightly different positions. If connection is not
established, keep the devices together until the camera screen
is updated.
- If you attempt connection when the camera is off, a message
may be displayed on the smartphone reminding you to turn on
the camera. If so, turn the camera on and touch the devices
together again.
- Do not place other objects between the camera and
smartphone. Also, note that camera or smartphone covers or
similar accessories may block communication.
● All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 3. To keep camera
images private, so that they cannot be viewed from the
smartphone, choose [No] in step 3.
● Once you have registered a smartphone, you can change privacy
settings for it on the camera (
=
158).