40
Chapter 7 Scanning with
CaptureOnTouch
This section describes the scanning procedure when using
CaptureOnTouch.
What is CaptureOnTouch? ................................................................ 40
Starting and Exiting CaptureOnTouch ............................................. 41
Scan First ............................................................................................ 43
Select Scan Job .................................................................................. 45
Scanning with Start Button................................................................ 48
Scanner Settings ................................................................................ 48
Operation in Continuous Scanning Screen ..................................... 51
Setting the Output Method................................................................. 52
About file formats ............................................................................... 54
Environmental Settings...................................................................... 55
What is CaptureOnTouch?
CaptureOnTouch is a scanning application that allows you to scan a
document with a simple operation by following the instructions on
the screen.
CaptureOnTouch is provided with multiple scanning methods that can be
selected according to the purpose and application.
Turn OFF the Auto Start switch on the rear of the scanner, and use the
supplied USB cable to connect the scanner to the computer. For details,
see "Connecting the Scanner to the Computer" on p.21.
Scan First
Scan a document and then select the output method. This method allows
you to easily scan a document by just following the instructions on the
screen.
Select Scan Job
Register scanning settings from the scanning conditions to the output
method as jobs, and then scan a document by just selecting the job that
suits your purpose. This method is convenient when you want to repeat
scanning using a set procedure.
Scan with Start Button
Scan First is pre-assigned to the Start button of the scanner, so you can
load a document and then start scanning by just pressing the Start button.
You can also assign any job to the Start button.