42
Exiting CaptureOnTouch
To close the CaptureOnTouch window, click
at the top of the
window. This closes the window, but CaptureOnTouch will continue to
reside in the system.
To quit the CaptureOnTouch application, click
(CaptureOnTouch icon)
in the taskbar, and select [Exit] from the menu.
CaptureOnTouch becomes no longer resident in the system and the icon
disappears from the taskbar.
To close the CaptureOnTouch window, click
at the top of the window.
This closes the window, but CaptureOnTouch will continue to reside in the
system.
click
(CaptureOnTouch icon) in the menubar, and select [Exit] from the menu.
Restarting CaptureOnTouch
To use CaptureOnTouch after it has been made not resident in the
system, use one of the following procedures to restart it. CaptureOnTouch
will start and become resident in the system again.
z
Click [Start] - [All Programs] - [Canon P-208] - [P-208
CaptureOnTouch].
z
Press the Start button on the scanner (in this case, the main screen
of CaptureOnTouch will open and scanning will start using the scan
method assigned to the Start button).
z
The first time you start CaptureOnTouch on a computer with
the Evernote plug-in installed, a message for confirming the
job registration for sending scanned images to Evernote
appears. Clicking the [OK] button registers two Evernote jobs
to CaptureOnTouch.
z
The interval between the time you press the Start button on the
scanner and the time scanning begins is shortened when the
[Make CaptureOnTouch resident] check box is selected in the
[Basic settings] tab of the [Environmental settings] dialog box.
For details, see "Environmental Settings" on p.55.