44
(2) Specify whether to scan the document in full auto mode. When you
want to specify arbitrary scanning conditions, select [OFF] and
configure the scanner settings. -> "Scanner Settings" on p.48
4
Click the Start button.
The document is scanned. While scanning is in progress, the number of
pages scanned is displayed in addition to the scanner settings.
When scanning is finished, the Output settings screen appears.
If you configure scanning conditions that consume a large amount of
the computer's memory, scanning may stop because of insufficient
memory. If an error message appears due to insufficient memory
while scanning is in progress, stop scanning, change the scanning
conditions, and then try scanning again.
A multiple-page scan cannot be saved when it reaches the file size of
2 GB. Change the save settings if an error message is displayed.
Full Auto Mode automatically sets the appropriate scan settings for the
document.
If a document is scanned when [Enable continuous scanning] is
set to [ON], the continuous scanning screen appears when
scanning of the document is finished. -> "Operation in Continuous
Scanning Screen" on p.51
If you place the next document and click [Scan], scanning of the
document starts.
When scanning of all the documents is finished, click [Next step].