30
3
Set the scanning method.
(1) Specify whether to enable continuous scanning. When previewing
the scanned image or splitting up a large document to scan in parts,
select [ON] to enable continuous scanning.
(2) Specify whether to scan the document in full auto mode. When you
want to specify arbitrary scanning conditions, select [OFF] and
configure the scanner settings. ("Scanner Settings")
4
Click the Start button.
Scanning of the document starts.
When scanning of the whole document is completed, the output settings screen
appears.
If you place the next document and click [Scan], scanning of the document
starts.
Do not close the feed tray before the main screen of CaptureOnTouch
Lite appears.
If you configure scanning conditions that consume a large amount of the
computer's memory, scanning may stop because of insufficient memory.
If an error message appears due to insufficient memory while scanning
is in progress, stop scanning, change the scanning conditions, and then
try scanning again.
If a document is scanned when [Enable continuous scanning] is
set to [ON], the continuous scanning screen ("Operation in
Continuous Scanning Screen") appears when scanning of the
document is finished.