Canon MultiPASS F20, Основное руководство

Страница: 40 / 110

6-2
Copying Chapter 6
Improving copied images
Setting color or black & white copying
Refer to Making copies on p. 6-1 and in step 4, set color or black & white copying as follows:
For color copying: Press [Color/B&W] to turn on the Color light.
For black & white copying: Press [Color/B&W] to turn on the B&W light.
Adjusting the image quality (resolution)
Refer to Making copies on p. 6-1 and in step 4, adjust the image quality as follows:
1
Press [Menu] four times.
2
Use [
2
] or [
3
] to select the image quality.
• In black & white mode, select:
– <B&W TEXT> for text-only documents.
– <B&W PHOTO> for photographs.
– <B&W DRAFT> for high-speed copying at a lower resolution.*
In color mode, select:
– <COLOR NORMAL> for color text-only documents.
– <COLOR FINE> for color photographs.
– <COLOR FAST> for high-speed color copying at a lower resolution.*
3
Press [Set].
NOTE
• When using <COLOR FAST>, if the color output is different from that expected, select <COLOR
NORMAL> or <COLOR FINE> and try copying again.
Adjusting the exposure (density)
Exposure (density) is the degree of difference between light and dark. A high exposure
setting will make blacks darker and whites brighter, whereas a low exposure setting will make
the differences between black and white less marked.
Refer to Making copies on p. 6-1 and in step 4, adjust the exposure as follows:
1
Press [Menu] three times.
2
Use [
2
] or [
3
] to select the exposure.
3
Press [Set].
3 . D E N S I T Y
- L T D K +
4 . I M A G E Q U A L I T Y
B & W T E X T
* This setting is only available when <PLAIN> is selected as the print media type ( p. 3-7).