Canon MultiPASS C555 Скачать руководство пользователя страница 76

Страница: 76 / 212

6-4

Speed Dialing

Chapter 6

Use the numeric buttons to enter the fax/

Ex:

telephone number you want to register (max.
120 digits, including spaces and pauses).

• To enter a space, press

Space

. Spaces are

optional and are ignored during dialing.

• To enter a pause, press

Redial/Pause

• To correct a mistake in the number, press

delete the rightmost digit.

• To delete an entire entry or to change a

previous entry, press

Clear

• If you have already registered a number and

you only want to change the name, ignore this
step.

• To cancel one-touch speed dialing for the

button you selected, press

Clear

then

Set

Press

Stop

to return to standby mode. The

fax/telephone number and name registered
under that button will be deleted.

Press twice.

Use the numeric buttons to enter the name

Ex:

that goes with the number (max. 16
characters, including spaces).

• If you are unsure how to enter characters,

(

p. 3-3).

• If you have already registered a name and

want to keep the same name, ignore this step.

Press .

Ex:

To continue registering other one-touch
speed dialing buttons, repeat the procedure
from step 5.
-or-
Press

to return to standby mode.

Ex:

You can print the 1-Touch Spd Dial List showing all the numbers and names registered for
one-touch speed dialing (

p. 6-13). Keep this list near your MultiPASS so you can refer

to it easily when dialing.

12/27 FaxTel

Stop

05=

DATA ENTRY OK

Set

Canon EUROPA

NAME

DATA ENTRY OK

Set

TEL=20 545 8545_

Содержание MultiPASS C555





















































































































































































































Результаты поиска

Содержание MultiPASS C555

Отзывы:

Canon MultiPASS C555, Руководство пользователя, Страница: 76 / 212

Результаты поиска

Содержание MultiPASS C555

Отзывы: