manualshive.com logo in svg

Canon MultiPASS C555, Руководство пользователя, Страница: 36 / 212

Поделиться
Скачать
Canon MultiPASS C555 Скачать руководство пользователя страница 36

2-14

Setting Up

Chapter 2

c

The ink in the BJ cartridges and tanks is difficult to clean up if spilled. Follow these
precautions when handling:
• Carefully remove packaging from BJ cartridges and tanks.
• Do not attempt to disassemble or refill BJ cartridges or tanks.
• Do not shake or drop BJ cartridges or tanks, or tip the print head downward.

Installing the BJ Cartridge in the MultiPASS

When there is no BJ cartridge installed in the MultiPASS, the LCD displays 

PUT IN

CARTRIDGE

.

Follow this procedure to install the BJ cartridge:

1

Make sure the MultiPASS is plugged in.

2

Open the document tray.

3

Lift the document guides to open the
printer cover.

• If the printer cover does not open easily,

slide the document guides outward and
then open the printer cover.

n

When you plug in the MultiPASS for
the first time, the cartridge holder
automatically moves to the center of
the unit so you can install the BJ
cartridge. If the cartridge holder is not
in the center, press 

C

(inside the unit).

DOCUMENT GUIDES

Содержание MultiPASS C555





















































































































































































































Отзывы:

Нет отзывов