20
Terminals
1
3
2
4
5
6
8
7
9
10
11
Item
Label
Description
1
TRIGGER
Provide 12V (+/- 1.5) output for screen operation.
2
CONTROL
Connect to the PC for system maintenance , projector maintenance
and user commands.
3
COMPUTER-2
Receives the analog PC signal (Analog PC-2).
Connect BNC-type input connectors to the RGB or YPbPr/YCbCr
output signal video equipment.
4
COMPUTER-1
Receives the analog PC signal.
Connect the D-sub 15pin input connector to the RGB output signal.
5
MONITOR-OUT
Outputs an analog RGB signal (COMPUTER-1) to display an
image on an external monitor.
6
REMOTE
This terminal is used to connect the optional remote control using a
cable. Connect a 3.5 mm jack from a wired remote.
7
HDBaseT/LAN*
Receives HDBaseT input including digital video and audio signals.
A LAN cable (shielded twisted pair of CAT5e or higher) can be
used for video input.
Connects the LAN cable. Used to connect the projector to a
network. However, the sound does not come out of the projector.
8
DVI-D
Receives digital PC signal (with DVI-D digital PC).
9
3G-SDI IN
Receives SDI signal.
10
3G-SDI OUT
Outputs a signal connected with SDI IN terminal.
11
HDMI
Receives digital video signals (HDMI).
* Notes on HDBaseT
■
Use a shielded cable rated at CAT5e or higher.
■
Maximum transmission distance is 100 m.
However, maximum transmission distance may be shorter in some environments.
■
Do not use the LAN cable when it is coiled or bundled.
■
Inserting or removing the LAN cable during projection may cause noise.
■
Connectivity with all HDBaseT transmitters on the market is not guaranteed.
■
Some HDBaseT transmitters may not enable correct projection when used to connect source
equipment to the projector.
