53
LASER Menu
Power Mode
Power Level
High Altitude
Normal
─ ─ ─ ─ ─
Auto
HDMI
DISPLAY
PICTURE
LASER
ALIGNMENT
CONTROL
SERVICE
Label
Description
Power Mode
Press ◄ or ► to select a power mode. The options are
Normal
,
Eco
or
Custom
.
Power Level
Press ◄ or ► to adjust custom power level. The function is only available
when
Power Mode
is
Custom
. Adjust the power level may change the
brightness.
High Altitude
There are two High Altitude mode settings:
Auto
and
High
.
Auto:
The rotation rate of the fan is adjusted automatically to match the
ambient temperature and air pressure.
High:
The rotation rate of the fan is set to maximum.
Press ◄ or ► to select a high altitude setting
Auto
or
High
.
The high-altitude mode must be set to
High
under the following conditions:
■
The elevation is 1,219 meters (4,000 feet) or above.
■
The tilt angle of the projector is greater than ±10 degrees.
Note:
If the projector is in operation in a high heat or high altitude environment,
it may shut down automatically. In this setup, you can enable the
High
Altitude
function by selecting
High
and setting the fan to operate at a higher
speed to maintain proper cooling levels on the projector.
