102
Notes for Projection Mode
1. Referring to the following illustration, select a
Projection Mode
in the
ALIGNMENT
menu. The
options are
Front Tabletop
,
Front Ceiling
,
Rear Tabletop
and
Rear Ceiling
.
2. When the projector is installed in a tilt angle over ±10 degrees, you need to select
High
at the
High
Altitude
function in the
LASER
menu. This function sets the fan speed to high due to the high
altitude environment.
0
180
90
270
Down + Front
Front Table
Rear Table
Front Ceiling
Rear Ceiling
UP + Front
Note:
Using the projector in the following situation may accelerate the deterioration of optical parts.
■
When the projector is installed on which projection lens faces downward.
■
When the Air intake vent of the projector side faces downward in the portrait projection.
