Canon iR2018 Series, Руководство по обслуживанию

Страница: 289 / 348

Chapter 15
15-23
If any operation error occurs after changing the setting value, change the setting value to the original one.
15.6.3 <024:CIS scan position during ADF scanning>
0017-6118
This value is used when automatic scan position adjustment (TESTMODE>"2"SCAN TEST>"3"SHEET POS ADJ) fails.
15.6.4 <026:Distance from the standby position of CIS to the shading start point>
0017-6119
White shading can be adjusted finely.
Normally, do not change the setting value. If any operation error occurs after changing the setting value, change the setting value to the original one.
15.6.5 <031Vertical scan start position adjustment>
0017-6120
Adjust the position at which vertical scanning of a book starts. The larger the adjustment value, the narrower the left-side margin of the image becomes.
15.6.6 <032Horizontal scan start position adjustment>
0017-6121
Adjust the position at which horizontal scanning of a book starts. The larger the adjustment value, the narrower the top margin in the image becomes.
15.6.7 <033Vertical scan magnification correction>
0017-6122
Correct the magnification of vertical scanning of a book. The larger the adjustment value, the more the image stretches in the vertical scanning direction.
15.6.8 <035: - 036:Reader motor speed change>
0017-6123
Though no market adjustment work needs to be carried out, enter factory defaults at image processor PCB replacement.
15.6.9 <041: Vertical scan start position adjustment (when scanning on a document fed from ADF)>
0017-6124
Adjust the position at which vertical scanning of a document fed from the ADF starts. The larger the adjustment value, the narrower the left-side margin of the
image becomes.
15.6.10 <042: Horizontal scan start position adjustment (when scanning on a document fed from ADF)>
0017-6125
Adjust the position at which horizontal scanning of a document fed from the ADF starts. The larger the adjustment value, the narrower the top margin of the image
becomes.
15.6.11 <043: Horizontal scan end position correction ((copy:scanning on ADF)>
0017-6126
Adjust the position at which horizontal scanning of a document being copied ends (when scanning on a document fed from ADF). The larger the adjustment value,
the narrower the bottom margin of the image becomes.
15.6.12 <044: Horizontal scan end position correction (superfine:scanning on ADF)>
0017-6127
Adjust the position at which horizontal scanning of a FAX document scanned in superfine mode ends. The larger the adjustment value, the narrower the bottom
margin of the image becomes.
15.6.13 <045: Horizontal scan end position correction (fine:scanning on ADF)>
0017-6128
Adjust the position at which horizontal scanning of a FAX document scanned in fine mode ends. The larger the adjustment value, the narrower the bottom margin
of the image becomes.
15.6.14 <046: Horizontal scan end position correction (standard:scanning on ADF)>
0017-6129
Adjust the position at which horizontal scanning of a FAX document set to the standard scan resolution ends. The larger the adjustment value, the narrower the
bottom margin of the image becomes.
195: ADF special paper, standardized size: LTR_R
misidentification-ready 0 0 : LTR_R
1 : FOOLSCAP
2 : OFFICIO
3 : E_OFFICIO
4 : G_LTR_R
5 : A_LTR_R
196: shading target value (red) 272 0-511
197: shading target value (green) 272 0-511
198: shading target value (blue) 272 0-511
199: - 212: Not used
213: XYZ correction value (X) of standard white plate 8273 1-9999
214: XYZ correction value (Y) of standard white plate 8737 1-9999
215: XYZ correction value (Z) of standard white plate 9427 1-9999
216: - 350: Not used
No. Function Default Setting range Unit