manualshive.com logo in svg

Canon iR2018 Series, Руководство по обслуживанию

Принтер Canon iR2018 Series - надежное и многофункциональное устройство для офиса. У нас вы можете бесплатно скачать Руководство по обслуживанию, чтобы узнать все возможности и функции этого принтера. Загружайте его на manualshive.com прямо сейчас и настройте ваш принтер по максимуму!

Поделиться
Скачать
background image

Chapter 14

14-11

##0286 

[Tx]

at time of transmission, DCN is received after transmission of EOM.

##0287 

[Tx]

at time of transmission DCN is received after transmission of MPS.

##0288

[Tx] 

after transmission of EOP, a signal other than PIN, PIP, MCF, RTP, or RTN has been received.

##0289 

[Tx]

after transmission of EOM, a signal other than PIN, PIP, MCF, RTP, or RTN has been received.

##0290

[Tx]

after transmission of MPS, a signal other than PIN, PIP, MCF, RTP, or RTN has been received.

##0670 

[Tx] 

at time of V.8 late start, the V.8 ability of DIS front the receiving party is expected to be detected, and the CI signal is expected 
to be transmitted in response; however, the procedure fails to advance, and the line is released because of T1 time-out.

##0671

[Rx]

at time of V.8 arrival, procedure fails to move to phase 2 after detection     of CM signal from caller, causing T1 time-out and 
releasing line

##0672 

[Tx]

at time of V.34 transmission, a shift in procedure from phase 2 to phase 3 and thereafter stops, causing the machine to release 
the line and suffer T1 timeout.

##0673 

[Rx]

at time of V.34 reception, a shift in procedure from phase 2 to phase 3 and thereafter stops, causing the machine to release the 
line and suffer T1 timeout.

##0674

[Tx]

at time of V.34 transmission, a shift in procedure from phase 3 and phase 4 to the control channel and thereafter stops, causing 
the machine to release the line and suffer T1 timeout.

##0675 

[Rx]

at time of V.34 reception, a shift in procedure from phase 3 and phase 4 to the control channel and thereafter stops, causing the 
machine to release the line and suffer T1 timeout.

##0750 

[Tx] 

at time of ECM transmission, no meaningful signal is received after transmission of PPS-NULL, causing the procedural signal 
to be transmitted more than specified.

##0752 

[Tx]

at time of ECM transmission, DCN is received after transmission of PPS-NULL.

##0753 

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-NULL, 
or T5 time-out (60 sec) has occurred.

##0754 

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-NULL.

##0755 

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of PPS-MPS, causing the procedural signal to 
be transmitted more than specified.

##0757 

[Tx]

at time of ECM transmission, DCN is received after retransmission of PPS-MPS.

##0758 

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-MPS, or 
T5 time-out (60 sec) has occurred.

##0759 

[Tx] 

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-MPS.

##0760 

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of PPS-EOM, causing the procedural signal to 
be transmitted more than specified.

##0762 

[Tx]

at time of ECM transmission, DCN is received after transmission of PPS-EOM.

##0763 

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-MPS, or 
T5 time-out (60 sec) has occurred.

##0764 

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-EOM.

##0765

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of PPS-EOP, causing the procedural signal to 
be transmitted more than specified.

##0767 

[Tx]

at time of ECM transmission, DCN is received after transmission of PPS-EOP.

##0768 

[Tx] 

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-EOP, or 
T5 time-out (60 sec) has occurred.

##0769 

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-EOP.

##0770 

[Tx] 

at time of ECM transmission, no meaningful signal is received after transmission of EOR-NULL, causing the procedural signal 
to be transmitted more than specified.

##0772 

[Tx]

at time of ECM transmission, DCN is received after transmission of EOR-NULL.

##0773 

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of EOR-NULL, 
or T5 time-out (60 sec) has occurred.

##0774

[Tx]

at time of ECM transmission, ERR is received after transmission of EOR-NULL.

##0775 

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of EOR-MPS, causing the procedural signal to 
be transmitted more than specified.

##0777 

[Tx]

at time of ECM transmission, DCN is received after transmission of EOR-MPS.

##0778 

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission EOR-MPS, or 
T5 time-out (60 sec) has occurred.

##0779 

[Tx]

at time of ECM transmission, ERR is received after transmission of EOR-MPS.

##0780 

[Tx] 

at time of ECM transmission, no meaningful signal is received after transmission of EOR-EOM, causing the procedural signal 
to be transmitted more than specified.

##0782 

[Tx] 

at time of ECM transmission, DCN is received after transmission of EOR-EOM.

##0783 

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of EOR-EOM, 
or T5 time-out (60 sec) has occurred.

##0784 

[Tx]

at time of ECM transmission, ERR is received after transmission of EOR-EOM.

##0785 

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of EOR-EOP, causing the procedural signal to 
be transmitted more than specified.

##0787 

[Tx]

at time of ECM transmission, DCN is received after transmission of EOR-EOP.

##0788 

[Tx] 

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of EOR-EOP, or 
T5 time-out (60 sec) has occurred.

##0789 

[Tx]

at time of ECM transmission, ERR is received after transmission of EOR-EOP.

##0790

[Rx]

at time of ECM reception, ERR is transmitted after transmission of EOR-Q.

##0791 

[Tx/Rx]

while ECM mode procedure is under way, a signal other than a meaningful signal is received.

##0792 

[Rx]

at time of ECM reception, PPS-NULL cannot be detected over partial page processing.

##0793 

[Rx]

at time of ECM reception, no effective frame is received while high-speed signal reception is under way, thus causing time-out.

##0794 

[Tx]

at time of ECM reception, PPR with all 0s is received.

##0795 

[Tx/Rx]

a fault has occurred in code processing for communication.

No. Tx/Rx

Description

Содержание iR2018 Series





























































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для iR2018 Series

Oki C831 Safety And Warranty Manual preview
C831
Бренд: Oki Страницы: 48
Olympus P-10 Supplementary Manual preview
P-10
Бренд: Olympus Страницы: 2
Olympus P-10 Instruction Manual preview
P-10
Бренд: Olympus Страницы: 148
Oki B6500n Installation Manual preview
B6500n
Бренд: Oki Страницы: 1
Xerox AltaLink B8145 User Manual preview
AltaLink B8145
Бренд: Xerox Страницы: 418
Konica Minolta Bizhub 222 Instructions Manual preview
Bizhub 222
Бренд: Konica Minolta Страницы: 15
Oki B4600 Series Specifications preview
B4600 Series
Бренд: Oki Страницы: 2
Lexmark C910 Finisher Manual preview
C910 Finisher
Бренд: Lexmark Страницы: 11
Xerox WorkCentre M118i Quick Setup Manual preview
WorkCentre M118i
Бренд: Xerox Страницы: 5
NEC MultiSync 95 Support Document preview
MultiSync 95
Бренд: NEC Страницы: 7
IBM INFOPRINT HI-LITE COLOR 4005-HC2 Upgrade Manual preview
INFOPRINT HI-LITE COLOR 4005-HC2
Бренд: IBM Страницы: 10
SPRT SP-RMT12 User Manual preview
SP-RMT12
Бренд: SPRT Страницы: 14
Nitto Denko DURA PRINTER SI600 Instruction Manual preview
DURA PRINTER SI600
Бренд: Nitto Denko Страницы: 174
Xprinter XP-470 Series User Manual preview
XP-470 Series
Бренд: Xprinter Страницы: 40
Riso KZ30 User Manual preview
KZ30
Бренд: Riso Страницы: 82
Olivetti DR N17 Service Manual preview
DR N17
Бренд: Olivetti Страницы: 558
Xerox Phaser 3600 Instruction preview
Phaser 3600
Бренд: Xerox Страницы: 23
2connet 2C-POS80-02 User Manual preview
2C-POS80-02
Бренд: 2connet Страницы: 17

Бренды по названию

Популярные бренды

Загрузить еще бренды