Canon iR2018 Series, Руководство по обслуживанию

Страница: 294 / 348

Chapter 15
15-28
To cancel the inner limit of the fixed temperature adjustment, select "Setting".
15.7.1.4.3 Detailed Discussions of Bit 1
0017-8535
If there is no progress after shifting the target figure of the temperature adjustment using "Temperature Adjustment UP/DOWN Mode", # PRINTER> Numeric>
Parameter 62, 63, cancel the 2nd face of the duplex inner limit of the fixed temperature adjustment.
Select "Setting" to cancel the 2nd face of the duplex inner limit of the fixed temperature adjustment.
15.7.1.4.4 Detailed Discussions of Bit 2
0017-8536
When selecting the post cards, besides the 'Reply post card', 'Post card', and the 'Four face post card', 'Thin post card' could be selected. Select 'Setting' and 'Thin
post card' would be selected.
15.7.2 Numerin Parameter Settings (Numeric Prama.)
15.7.2.1 List of Functions
0017-6156
15.7.2.2 <031: Top registration adjustment (manual feed tray)>
0017-6157
Adjust the top registration margin of paper picked from a manual feed tray. The larger the adjustment value, the wider the top margin of the image becomes.
15.7.2.3 <032: Top registration adjustment (cassette)>
0017-6158
Adjust the top registration margin of paper picked from cassettes. The larger the adjustment value, the wider the top margin of the image becomes.
15.7.2.4 <033: Top registration adjustment (duplex unit)>
0017-6159
Adjust the top registration margin of paper picked from a duplex unit. The larger the adjustment value, the wider the top margin of the image becomes.
15.7.2.5 <034: Left-end registration adjustment (manual feed tray)>
0017-6160
Adjust the left-end registration margin of paper picked from a manual feed tray. The larger the adjustment value, the wider the left-end margin of the image be-
comes.
15.7.2.6 <035: Left-end registration adjustment (cassette 1)>
0017-6162
Adjust the left-end registration margin of paper picked from cassette 1. The larger the adjustment value, the wider the left-end margin of the image becomes.
No. Function Default Setting range
01: - 30: Not used
31: Top registration adjustment (manual feed tray) 50 0 to 100, one unit = 0.1 mm
32: Top registration adjustment (cassette) 50 0 to 100, one unit = 0.1 mm
33: Top registration adjustment (duplex unit) 50 0 to 200, one unit = 0.1 mm
34: Left-end registration adjustment (manual feed tray) 100 0 to 200, one unit = 0.1 mm
35: Left-end registration adjustment (cassette 1) 100 0 to 200, one unit = 0.1 mm
36: Left-end registration adjustment (cassette 2) 100 0 to 200, one unit = 0.1 mm
37: Left-end registration adjustment (cassette 3) 100 0 to 200, one unit = 0.1 mm
38: Left-end registration adjustment (cassette 4) 100 0 to 200, one unit = 0.1 mm
39: Left-end registration adjustment (duplex unit) 100 0 to 200, one unit = 0.1 mm
40: Target fixing temperature adjustment (multi) 6 -30 to 0, one unit = 5 deg C
41: Target fixing temperature adjustment (cassette 1) 6 -30 to 0, one unit = 5 deg C
42: Target fixing temperature adjustment (cassette 2) 6 -30 to 0, one unit = 5 deg C
43: Target fixing temperature adjustment (cassette 3) 6 -30 to 0, one unit = 5 deg C
44: Target fixing temperature adjustment (cassette 4) 6 -30 to 0, one unit = 5 deg C
45: Fixing film speed change (manual feed tray) 16 0 to 30, 1 unit = 0.4%
46: Fixing film speed change (cassette) 16 0 to 30, 1 unit = 0.4%
47: - 52: Not used
53: Adjustment of margin at leading edge of copy 0 0 to 9999, one unit = 0.1 mm
54: Adjustment of margin at trailing edge of copy 0 0 to 9999, one unit = 0.1 mm
55: Adjustment of margin at right edge of copy 0 0 to 9999, one unit = 0.1 mm
56: Adjustment of margin at left edge of copy 0 0 to 9999, one unit = 0.1 mm
57: Not used
58: Adjustment of the registration loop volume (Manual
tray) 100 85 to 115, one unit = 0.5 mm
59: Adjustment of the registration loop volume (Cassette) 100 85 to 115, one unit = 0.5 mm
60: Adjustment of the registration loop volume (Optional
cassette) 100 85 to 115, one unit = 0.5 mm
61: Adjustment of the registration loop volume (Duplex
unit) 100 85 to 115, one unit = 0.5 mm
62: Temperature adjustment UP/DOWN mode (For
normal paper) 7 0 to 14, one unit = 5 deg C
63: Temperature adjustment UP/DOWN mode. (For thick
paper) 7 0 to 14, one unit = 5 deg C
64: Mode for preventing the end temperature rise 0 0 to 5
65: Mode for reducing sand image 0 0 to 3
66: Temperature/ Humidity sensor fixed mode 0 0 to 3
67: - 70: Not used