Canon iR2018 Series Скачать руководство пользователя страница 57

Страница: 57 / 348

Chapter 2

2-7

1) Attach the ferrite core [2] to the user's USB cable, and then connect the

USB cable to the USB port of the host machine.

F-2-30

2.2.6 Checking the Image Quality

0017-5531

1) Plug the power cord into the outlet, and then turn on the main power

switch [2].

Supply of toner will start after the initial rotation. After a few minutes,

supply of toner finishes and the machine stops automatically.

F-2-31

2) Place a document on the document glass, take a copy of it by supplying

paper from the cassette or manual feed tray, and check the printed image.

Also perform the following checks:

- Check whether abnormal sound is heard.

- Check the printed images at all preset magnifications.

- Check whether the document is copied normally on the specified

number of sheets.

2.2.7 Setting the Country/Region

0017-5533

1) Press the following keys to display the service mode screen:

> 2 Key > 8 Key >

2) Select "# CLEAR" using

, and then press the OK.

3) Select "TYPE" using

, and then press the OK.

4) Using

, select the country/region type that conforms to the com-

munication standard used in the country/region where the machine is

used.

5) Press the OK. When "Please Wait" disappears, the selected country/region

type takes effect.

2.2.8 Setting the Date and Time

0017-5535

1) Press

key to display the user mode screen.

2) Select "TIMER SETTINGS" and then press the OK.

3) Select "DATE&TIME SETTING", and then press the OK. The set date

and time appears.

4) Enter the current date and time with the ten keys.

5) Press the OK to allow the entered date and time to take effect.

To reduce noise, attach the ferrite core as close to the USB port of the host
machine as possible.

Use the specified power supply (rated voltage -/+10% and rated current).

[1]

[2]

[1]

Содержание iR2018 Series





























































































































































































































































































































































Результаты поиска

Содержание iR2018 Series

Отзывы:

Похожие инструкции для iR2018 Series

Бренды по названию

Популярные бренды

Canon iR2018 Series, Руководство по обслуживанию

Результаты поиска

Содержание iR2018 Series

Отзывы:

Похожие инструкции для iR2018 Series

Бренды по названию

Популярные бренды